Surface roughness modeling using machine learning approaches for wire electro-spark machining of titanium alloy

Abstract

Purpose: In the present study, wire electro-spark machining of Titanium alloy is performed with the machining parameter such as spark-on time, spark-off time, current and servo voltage. The purpose of this study is to model surface roughness using machine learning approach for input/controllable variable. Machined surface examined using scanning electron microscope (SEM) and XRD methods. Design/methodology/approach: Full factorial approach has been used to design the experiments with varying machining parameters into three-level four factors. Obtained surface roughness was modeled using machine learning methods namely Gaussian process regression (GPR) and support vector machine (SVM) methods. These methods were compared for both training and testing data with a coefficient of correlation and root mean square error basis. Machined surface examined using scanned electron microscopy and XRD for surface quality produced and check migration of tool material to workpiece material. Findings: Machine learning algorithms has excellent scope for prediction quality response for the wire electric discharge machining (WEDM) process, resulting in saving of time and cost as it is difficult to find each time experimentally. It has been found that the proposed model with minimum computational time, provides better solution and avoids priority weightage calculation by decision-makers. Originality/value: The proposed modeling provides better predication about surface produced while machining of Ti6Al7Nb using zinc-coated brass wire electrode during WEDM operation. © 2022, Emerald Publishing Limited.