The investigation of different particle size magnesium-doped zinc oxide (Zn0.92Mg0.08O) nanoparticles on the lubrication behavior of paraffin oil

Abstract

Magnesium-doped zinc oxide (Zn0.92Mg0.08O) (ZMO) nanoparticles of 23 nm particle size have been synthesized by auto-combustion method. The variation in particle size of these nanoparticles has been performed by their further calcination at 800 and 1000 C for 2 h and the corresponding calcined particles are designated as ZMO-1 and ZMO-2, respectively. The nanoparticles have been characterized by powder-XRD, scanning electron microscopy (SEM), energy dispersive X-ray and transmission electron microscope. The effect of particle size on the antiwear lubrication behavior of paraffin base oil has been investigated on four-ball lubricant tester. The tribological tests of these nanoparticles as antiwear additives have been studied at an optimized concentration (0.5 %w/v) by varying load for 30 min test duration and by varying the test durations at 392 N load. Various tribological parameters such as mean wear scar diameter, friction coefficient (l), mean wear volume, running-in and steady-state wear rates show that these nanoparticles act as efficient antiwear additives and possess high load-carrying ability. From these tribological tests it has been observed that the lubrication behavior of studied nanoparticles is strongly sizedependent. The best tribological behavior is shown by nanoparticles of the smallest size, ZMO. Being sulfur, halogen and phosphorous free, ZMO nanoparticles have potential to be used as low SAPS lubricant additives. The SEM and atomic force microscopy analysis of the worn surfaces lubricated with ZMO nanoparticles at 392 N applied load for 60 min test duration show drastic decrease in surface roughness. The values of surface roughness of different additives are in good agreement with their observed tribological behavior