Experimental study on thermal performance of pulsating heat pipe with al2o3-deionizedwater nanofluid at different orientations

Abstract

Thermal resistance as a function of heat load and start-up temperature with respect to time have been investigated for a pulsating heat pipe (PHP) at different inclination angles. PHP was made of 1.45 mm inner diameter copper tubes having 6 turns. Al2O3 nanofluid (concentration 0.25%, 0.5, 1.0, 1.25, 1.5, and 2.5% by wt.) with particle size 45 nm at an optimum filling ratio of 50% was used. It is found that as the concentration increases from 0.25% to 1.0% there is considerable decrease in thermal resistance as compared to that of the base fluid but as the concentration increases from 1.25% to 2.5% the thermal performance deteriorates. Optimum concentration of nanoparticles was 1.0% by wt. in base fluid with respect to start-up and thermal resistance for PHP in vertical orientation and 45. inclination, while in horizontal orientation 0.5% by wt. concentration showed the best results. Maximum decrease in thermal resistance with respect to deionized (DI) water was observed at 50Wfor 1.0% nanofluid concentration by wt. at 45. inclination, which was 33.6%. Heat transfer coefficients at evaporator and condenser are also investigated at vertical mode of operation. © 2013 by Begell House, Inc.