Commercial- and whitewashing-grade limestone as a heterogeneous catalyst for synthesis of fatty acid methyl esters from used frying oil (UFO)

Abstract

Commercial-grade limestone used in whitewashing which is a low-cost material has been used as a catalyst for the synthesis of fatty acid methyl esters. The catalyst was characterized by differential thermal analysis/thermogravimetric analysis, X-ray diffraction, and Fourier transform infrared spectroscopy for the study of its physicochemical nature. The catalyst was calcined at 900 °C for 2. 5 h for the decomposition of calcium carbonate to calcium oxide. The catalyst was further activated by dissolving 1. 5 wt% of catalyst in 30 ml methanol (7. 5:1, methanol to used frying oil molar ratio) and stirred at 25 °C for 1 h on a magnetic stirrer. The transesterification reaction was performed using calcium oxide as a catalyst and then with the "activated calcium oxide." The conversion obtained was 94. 4 % with calcium oxide and was found to be lower for the "activated calcium oxide" (i. e., 87. 36 %). The conversion increased to 96. 8 % on increasing the catalyst amount to 2. 0 wt% in 5 h. A high yield (>95 %) of fatty acid methyl esters was observed when either calcium oxide or "activated calcium oxide" was taken as catalyst. The catalytic activity of calcium oxide obtained from low-grade limestone has been found to be comparable with the laboratory-grade CaO. © 2012 Springer-Verlag.